|
|
|
| |
Manufacturer Technical Specifications
|
| |
|
General
|
| | |
Country Of Origin
|
Italy
| |
Year Of Introduction
|
1992
| |
Base Price When New
|
$145,000
| |
Miles Per Gallon
|
N.A
|
|
Body Type
|
2 Door Coupe
| |
Curb Weight
|
3340 lbs
| |
Powertrain Layout
|
Mid Engine / RWD
| |
Transmission
|
5 Speed Manual
| | |
|
Engine
| | |
|
Configuration
|
Flat 12
| |
Displacement
|
4942 cc
| |
Power
|
421 bhp @ 6750 rpm
| |
Torque
|
360 lb ft @ 5500 rpm
| |
BHP / Liter
|
N.A
| |
BHP / Weight
|
N.A
| |
Redline
|
7000 rpm
| | |
|
Performance
| | |
|
Top Speed
|
192 mph
| |
0 - 62 mph
|
4.7 seconds
| |
0 - 100 mph
|
11.2 seconds
| |
0 - ¢®E¡Ëc¡Ë¢ç¢®¢¯u mile
|
12.9 seconds @ 110 mph
| |
Skidpad
|
0.90g
| |
Braking, 62-0 mph
|
130 ft
| |
Slalom Speed
|
65.1 mph
|
| |
|
|
Sponsors
| |
|
|
|
Wallpaper Gallery: 1600x1200
|
 |  | 
|
| |
Manufacturer Press Release
|
The Ferrari Testarossa leaped to center stage of the automotive world in 1984 and remained there for 11 years as the world's fastest regular production car. It was the definition of "supercar" in its era, the innovative benchmark against which all contemporary sports cars were measured.
When Ferrari set about creating a replacement for the Berlinetta Boxer, a V12 engine, high performance, style and exemplary design were assumed. Ferrari dictated that luxury and practicality befitting the world's premier production sports car were also to be encompassed. Even as the Testarossa exerted a pull on the hearts and minds of car lovers, not to mention designers, Ferrari did not sit on their laurels. 1984's Testarossa evolved into the 512TR of 1991. With each evolution the styling, interior, and drivetrain were enhanced in a car that was always capable of speeds exceeding 180mph, accelerated to 60mph in approximately 5 seconds, and attained almost 0.9G lateral acceleration.
Design
In 1991 the Testarossa evolved into the 512 TR with subtle exterior changes to improve aerodynamics. The alterations included a one-piece nose with rounded front grille, flush mounted lights and ducts, and a new undertray. At the rear a small kamm tail smoothed airflow. High speed stability and cooling improved, while lift was reduced.
Structure
The 512 TR had a floor pan strengthened at high stress points by chromium-molybdenum steel. New welding techniques strengthened joints. The drivetrain and rear suspension of the 512 TR were directly mounted on the full rear frame. These changes contributed to substantially increased torsional rigidity and decreased weight.
Drivetrain
The engine of the 512 TR evolved significantly to produce 421bhp at 6750rpm, and 360lbs-ft of torque at 5500rpm. The torque curve of the 512 TR is somewhat more progressive than that of its predecessor. These improvements were achieved through numerous small changes including a strengthened block, a 10:1 compression ratio, revised valves, and a new intake system that ingeniously changed the intake of air. A Bosch Motronic 2.7 system controlled the engine.
Wheels
To fully exploit its power, the 512 TR was also given new cast alloy wheels. These wheels are thinner spoked versions of the Testarossa"s, for improved brake cooling. The five hub bolts remain. These wheels are18"X8" with 235/ZR40 tires at front, and 18"X10.5" with 295/ZR35 tires at the rear.
Interior
The interior of the 512 TR differed most obviously from the Testarossa by changes to the center console, providing a more spacious feeling in the cabin. The basic shape and arrangement of the dashboard was unchanged, though its edges were rounded. Some gauges and instruments were relocated within the binnacle. The 512 TR was also given an updated Momo steering wheel with a slightly thicker leather covered rim. The seats were redesigned and lowered.
|
|
|
|
